ATMEGA328P-PU DIP28 IC

ATMEGA328P-PU DIP28 is a 8-bit AVR RISC-based microcontroller combines 32 KB ISP Flash memory with read-while-write capabilities, 1024B EEPROM, 2 KB SRAM, 23 general purpose I/O lines, 32 general purpose working registers, three flexible timer/counters with compare modes, internal and external interrupts, serial programmable USART, a byte-oriented Two-Wire serial interface, SPI serial port, a 6-channel 10-bit A/D converter (8-channels in TQFP and QFN/MLF packages), programmable watchdog timer with internal oscillator, and five software selectable power saving modes. The device operates between 1.8-5.5 volts.

Specifications :

• High Performance, Low Power Design
• 8-Bit Microcontroller Atmel AVR advanced RISC architecture
  • 131 Instructions most of which are executed in a single clock cycle
  • Up to 20 MIPS throughput at 20 MHz
  • 32 x 8 working registers
  • 2 cycle multiplier
• Memory Includes
  • 32KB of of programmable FLASH
  • 1KB of EEPROM
  • 2KB SRAM
  • 10,000 Write and Erase Cycles for Flash and 100,000 for EEPROM
  • Data retention for 20 years at 85°C and 100 years at 25°C
  • Optional boot loader with lock bits
  • In System Programming (ISP) by via boot loader
  • True Read-While-Write operation
  • Programming lock available for software security
• I/O and Package
  • 23 programmable I/O lines
  • 28 pin PDIP package
• Operating voltage:1.8 – 5.5V
• Operating temperature range:40°C to 85°C
• Speed Grades:
  • 0-4 MHz at 1.8-5.5V
  • 0-10 MHz at 2.7-5.5V
  • 0-20 MHz at 4.5-5.5V
• Low power consumption mode at 1.8V, 1 MHz and 25°C:
  • Active Mode: 0.3 mA
  • Power-down Mode: 0.1 μA
  • Power-save Mode: 0.8 μA (Including 32 kHz RTC)
• Package:

1 x ATMEGA328P PU